ComparisonArchitects and clients

Comparing Two Pellet Boiler Datasheets: Seasonal Efficiency and Ecodesign Emission Caps

How to compare two pellet boilers at design stage: seasonal efficiency, Ecodesign emission caps, and Luxembourg's Klimabonus 2026 thresholds.

Updated 4 November 2026·5 min read

Why do two datasheets showing the same efficiency not mean the same boiler?

Two pellet boilers can look nearly identical on paper. Seasonal efficiency and the emission caps from the Ecodesign regulation tell a different story. At design stage, these two lines on the datasheet deserve more attention than rated output or price.

Seasonal efficiency: a regulatory floor, not a selling point

Regulation (EU) 2015/1189 sets a minimum: at least 75% seasonal energy efficiency for space heating up to 20 kW of rated thermal output, and at least 77% above that. Every boiler sold in the EU must already meet this floor, so it does not separate a strong datasheet from a weak one.

What actually distinguishes two boilers is the margin above that floor, measured under EN 303-5 and shown in the full test report, not just the marketing summary. Ask for that report before comparing two quotes.

  • Check the rated output stated: the threshold changes at 20 kW.
  • Request the full EN 303-5 test report, not just the sales sheet.
  • An efficiency close to the regulatory floor is not a sign of good performance.

Emission caps: the gap between Ecodesign and the Klimabonus

The Ecodesign regulation sets different caps depending on loading mode. For particulate matter: 40 mg/m³ for automatic loading versus 60 mg/m³ for manual loading; for gaseous organic compounds, 20 versus 30 mg/m³; for carbon monoxide, 500 versus 700 mg/m³; nitrogen oxides stay capped at 200 mg/m³ for biomass boilers regardless of loading mode.

The Klimabonus 2026 grant goes further for eligible pellet boilers: particulate emissions of at most 8 mg/m³, nitrogen oxides of at most 200 mg/m³, and a production efficiency of at least 90%. On particulates, the gap with the Ecodesign floor for automatic loading (40 mg/m³) is substantial - a datasheet that only states Ecodesign compliance does not guarantee eligibility for the grant.

  • Automatic or manual loading: Ecodesign caps are not the same.
  • The Klimabonus 2026 requires particulate emissions of at most 8 mg/m³, well below the Ecodesign floor.
  • Check that the datasheet clearly states all three values: particulates, NOx, production efficiency.

How do you compare two datasheets at design stage?

At sketch design or early planning stage, always request the full documents for both boilers - not just brochures - before settling on a choice. Cross-check them against the pellets you plan to use: a boiler that looks strong on paper loses its real performance with pellets that fall short of the ENplus A1 standard.

  • Require the full EN 303-5 test report for each boiler compared.
  • Check the loading mode (automatic/manual) before comparing emission caps.
  • Confirm that all three Klimabonus 2026 thresholds (particulates, NOx, efficiency) are covered on the datasheet.
  • Always pair the boiler with ENplus A1 certified pellets.
  • For figures tailored to your project, a personalised study remains necessary.

Need personalised advice?

Our team supports you with selection, sizing and subsidy paperwork.

Call +352 661 309 000Study 24h